We flesh out the first story and choose some practical quick n dirty solutions to try out.
Thursday, March 19 2020
Implementing the first story
By Irving on Thursday, March 19 2020, 19:24 - Charge Monitor
Thursday, March 12 2020
Design Requirements
By Irving on Thursday, March 12 2020, 19:00 - Charge Monitor
Following on from the previous post, here I set out the design requirements. Initially, I'm going to use a technique out of the Agile software development process of defining functionality through a set of User Stories; A user story is the smallest unit of work in an agile framework. It's an end goal, not a feature, expressed from the (software) user's perspective. The purpose of a user story is to articulate how a piece of work will deliver a particular value back to the customer.
Monday, March 9 2020
Thingiverse: https://www.thingiverse.com/thing:3960174
By Irving on Monday, March 9 2020, 19:18 - 3D Printing
Horus X10S Express - 21700/20700 Li-Ion Battery Tray Adapter by Marco67
Sunday, March 8 2020
Thingiverse: https://www.thingiverse.com/thing:3233752
By Irving on Sunday, March 8 2020, 17:38 - 3D Printing
Frsky Horus X10 Long Li-Ion battery tray by PD5DJ
Sunday, March 1 2020
Charging Along
By Irving on Sunday, March 1 2020, 18:24 - Charge Monitor
A step by step approach to designing and building a charger monitoring solution for off-the-shelf mobility chargers. This blog was inspired by this thread on the WheelchairDriver.com forum.
We start with an overview of the issue and a review of the charging processes.
Wednesday, February 26 2020
R-Net Spelunking
By Irving on Wednesday, February 26 2020, 19:12 - R-Net
My investigation into PGDT's R-Net control system for wheelchairs and other mobility devices.
3D Printing
By Irving on Wednesday, February 26 2020, 19:02 - 3D Printing
An occasional look at exploits with my CEL RoboxPro 3D printer.
A New Beginning...
By Irving on Wednesday, February 26 2020, 17:33 - General
About this blog, and a little bit about me.